[LinkIt Smart 7688] MCS 上傳資料

Hi! 我是偉和

這篇要介紹如何用python 及NodeJS將7688所讀取到的感測器數值上傳到MCS上

注意：Python與NodeJS僅須執行其中一個即可

[pastacode lang="c" message="Arduino MCSUpload" highlight="" provider="manual"]

#define sensorPin A0

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  Serial1.begin(9600);

  pinMode(sensorPin, INPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
  int Sensor = analogRead(sensorPin);
  Serial.println(Sensor);
  Serial1.print('a');
  Serial1.print(String(Sensor).length());
  Serial1.print(Sensor);
  delay(1000);
}

[/pastacode]

[pastacode lang="python" message="python MCSUpload" highlight="" provider="manual"]

import serial
import time
import requests

ser = serial.Serial('/dev/ttyS0',9600)

device_id = "Your device ID"
device_key = "Your device Key"

data_channel = "sensor"
data_channel +=",,"
url = "http://api.mediatek.com/mcs/v2/devices/" + device_id
url += "/datapoints.csv"

def MCS_upload(value,length):
        data = data_channel+str(value)
        r = requests.post(url,headers = {"deviceKey" : device_key,'Content-Type':'text/csv'},data=data)
        print r.text

print "Start"
while True:
        if ser.read()=='a':
                IncommingNum = ser.read()
                sensor = int(ser.read(int(IncommingNum)))

                a = 8
                a += int(IncommingNum)

                MCS_upload(sensor,a)

[/pastacode]

NodeJS部分：

[pastacode lang="javascript" message="MCSUpload" highlight="" provider="manual"]

var mcs = require('mcsjs');
var SerialPort = require("serialport").SerialPort
var serialPort = new SerialPort("/dev/ttyS0",
{baudrate: 9600
});


var myApp = mcs.register({
        deviceId: 'your device ID',
        deviceKey: 'your device Key',
});

serialPort.on("open", function () {
        receivedData ="";
        serialPort.on('data',function(data)
        {
                receivedData =data.toString();
                a = receivedData.length;
                myApp.emit('sensor','', receivedData.substring(2,a));

        });
});

[/pastacode]

效果如圖